Hi, I'm looking for a replacement transformer for my Golden Knight Model BWR. The original runs the set fine but it has a short and gets really hot after 20 minutes running. I don't need an exact replacement as I just want to run the set without the smoke. The secondary windings need to be around 600V with a centre tap and one at 6.3 and one at 5V. the set runs an 80 rectifier valve.
Can you put up a photo of the back of your set so I can see what sort of mounting the transformer has?Also some dimensions,especially of the hole in the chassis if it is a through the chassis mount. The height of the laminations stack can be helpful too, as will the actual overall height, width, length etc. How many valves ,including .if fitted, the magic eye, are there in the set? A picture of the underside of the set would help also. I may have something which would do.