|
Post by Philconut on Feb 23, 2023 12:28:24 GMT 12
I have just finished working on a Gulbransen/Well-Gardner 7G chassis. The primary of the BC RF coil was open circuit so I had to remove the can to extract & rewind the coil. Here's where the silly bit comes in. The first photo shows the underside of the can with trimmers for the 3 bands. The earthy side tabs of the trimmers pass through slots in the can and are soldered to the can. - see 2nd photo. It wasn't all that difficult to gain access, and the repair was completely satisfactory, but I think the mechanics could have been better solved especially as other parts of the set are well designed.
|
|